• 全自动煤岩分析仪

  • 涡街流量计

  • 介电常数及介质损耗测试仪生产厂家

  • 德国北宁蓄电池介绍

  • 混凝土快速冻融ballbet贝博网页登录

  • 冷却塔

  • 分流器

  • 优质信息推广广告
    您的位置:阿仪网 > 其他产品/服务 > 其他产品/服务 > 其他产品/服务 > 鑫顺隆贸易(深圳)ballbet登录 > 产品展示 > 福斯 > 福斯液压油FUCHS RENOLIN MR40新闻资讯

    产品展示

    福斯液压油FUCHS RENOLIN MR40新闻资讯

    点击次数:111发布时间:2020/3/2

    福斯液压油FUCHS RENOLIN MR40新闻资讯

    更新日期:2020/3/2 15:29:05

    所 在 地:中国大陆

    产品型号:

    简单介绍:福斯RENOLIN MR多功能润滑油用于机器的磨合,功能测试和工作润滑。当在工厂注满油时,RENOLIN MR油即使在困难的条件下,例如在海外运输中,也能保证磨合过程中不会出现过度磨损和咬合,并能全面保护机械内部免受腐蚀。

    相关标签:FUCHS RENOLIN MR 40 福斯液压油 

    详细内容

    FUCHS RENOLIN MR油是满足此类应用多样性的润滑剂。
    RENOLIN MR油已经开发了30多年,但仍是目前可用的液压油和润滑油。这证明了这些油的质量,也证实了FUCHS R + D实验室的先见之明,该实验室首先开发了这些清洁剂液压油。

    RENOLIN MR系列油具有以下优点:


    多用途润滑油
    出色的防腐性能(给出了防腐油的特性)
    出色的清洁和污泥输送性能
    减少摩擦和磨损
    良好的抗老化性
    应用:

    建议将RENOLIN MR多功能润滑油用于机器的磨合,功能测试和工作润滑。当在工厂注满油时,RENOLIN MR油即使在困难的条件下,例如在海外运输中,也能保证磨合过程中不会出现过度磨损和咬合,并能全面保护机械内部免受腐蚀。另一个优点是,工厂填充的机油可以一直保留在机器中,直到下个例行换油间隔。

    如果无法将出厂时的机器注满机器,则在功能测试后残留的RENOLIN MR油膜可为所有湿润的表面提供良好的腐蚀防护。当用于正常操作时,RENOLIN MR油可减少磨损,避免粘滑或摩擦振动并防止腐蚀。此外,它们确保油路保持清洁。

    因此,如果需要在气缸和密封元件之间形成良好的润湿膜,以及在机械暴露于不利的大气条件(例如,温度波动大,从而形成冷凝水,空气中的粉尘)时,建议将RENOLIN MR油用于低速运动的机械中。例如在铸造厂,水泥制造厂或建筑工地,*后但并非*不重要的是,对于机床,尤其是使用与水混溶的切削液时。

    RENOLIN MR 0,MR 1和MR 3是推荐用于机床和纺织机械的重型主轴油。 RENOLIN MR 0特别适用于转速超过2,000 rpm的磨床主轴。 RENOLIN MR 1适用于转速在600至2,000 rpm之间的机床主轴,以及转速高于10,000 rpm的纺织机械主轴。 RENOLIN MR 3适用于转速低于600 rpm的机床主轴,以及转速低于10,000 rpm的纺织机主轴。

    RENOLIN MR 5,RENOLIN MR 10,RENOLIN MR 15是重型液压油,能够在短时间内承受超过100°C甚至120°C的连续温度。它们是液压设备的制造商推荐的产品,在某些情况下,它们是工厂灌装的。

    RENOLIN MR 10也适用于动力转向系统。建议将RENOLIN MR 10,RENOLIN MR 15和RENOLIN MR 20用于中等负荷的变速器,尤其是那些装有电磁多离合器的变速器。建议将RENOLIN MR 30和RENOLIN MR 40用于重型变速器。
     

    RENOLIN MR series oil has the following advantages:


    Multipurpose lubricant
    Excellent preservative properties (characteristics of preservative oils are given)
    Excellent cleaning and sludge transfer performance
    Reduce friction and wear
    Good resistance to aging
    application:

    It is recommended to use RENOLIN MR multifunctional lubricating oil for running-in, function testing and working lubrication of machines. When filled with oil at the factory, RENOLIN MR oil can ensure that excessive wear and seizure does not occur during the running-in process even under difficult conditions, such as during overseas transportation, and can fully protect the interior of the machine from corrosion. Another advantage is that the factory-filled oil can remain in the machine until the next routine oil change interval.

    If it is not possible to fill the machine at the factory, the RENOLIN MR oil film remaining after the function test provides good corrosion protection for all wet surfaces. When used in normal operation, RENOLIN MR oil reduces wear, avoids stick-slip or frictional vibrations, and prevents corrosion. In addition, they ensure that the oil circuit is kept clean.

    Therefore, RENOLIN MR is recommended if a good wetting film is required between the cylinder and the sealing element, and when the machine is exposed to adverse atmospheric conditions (for example, large temperature fluctuations, which can cause condensation, dust in the air). Oil is used in low speed machinery. For example in a foundry, cement manufacturing plant or construction site, last but not least, for machine tools, especially when using water-miscible cutting fluids.

    RENOLIN MR 0, MR 1 and MR 3 are heavy duty spindle oils recommended for machine tools and textile machinery. RENOLIN MR 0 is particularly suitable for grinding machine spindles with speeds exceeding 2,000 rpm. RENOLIN MR 1 is suitable for machine tool spindles with speeds between 600 and 2,000 rpm, and for textile machinery spindles with speeds above 10,000 rpm. RENOLIN MR 3 is suitable for machine tool spindles with speeds below 600 rpm and textile machine spindles with speeds below 10,000 rpm.

    RENOLIN MR 5, RENOLIN MR 10, RENOLIN MR 15 are heavy-duty hydraulic oils that can withstand continuous temperatures exceeding 100 ° C or even up to 120 ° C in a short period of time. They are products recommended by leading manufacturers of hydraulic equipment, and in some cases they are factory-filled.

    RENOLIN MR 10 is also suitable for power steering systems. RENOLIN MR 10, RENOLIN MR 15 and RENOLIN MR 20 are recommended for medium-duty transmissions, especially those with electromagnetic multi-clutch transmissions. RENOLIN MR 30 and RENOLIN MR 40 are recommended for heavy-duty transmissions.

    相关文章

    企业档案

  • 会员类型:免费会员
  • 工商认证: 【已认证】
  • 最后认证时间:
  • 法人:
  • 注册号:
  • 企业类型:经销商
  • 注册资金:人民币万
  • 联系我们

    联系人:李诚

    点击查看联系方式

    在线咨询5分钟应答

    提交